DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

LAN to LAN with multiple subnets - only one working

More
18 Sep 2012 11:04 #73533 by dangcongphung
I have the same issue
Who can help us?

Please Log in or Create an account to join the conversation.

More
18 Sep 2012 21:55 #73544 by nealuk

dangcongphung wrote: I have the same issue
Who can help us?



Premium Telephone Support: http://www.draytek.co.uk/support/telephone_support.html

Please Log in or Create an account to join the conversation.

More
02 Oct 2012 16:31 #73715 by sicon
Was this resolved?
Did yuo have a separete LAN to LAN profile for each remote subnet?
I know of Juniper Netscreens you can uses the same gateway for many IKE (remote subnets) maybe you need to do the same on the Draytek?

Please Log in or Create an account to join the conversation.

More
12 Oct 2012 10:39 #73812 by kungfoobob
I've just got off the phone to premium support, they don't know how to fix it either.

It's just doesn't work on any of my 2820's regardless of FW version, however this feature works prefectly on my older 2600+'s

My fix for now is to create a tunnel for each remote subnet, bit of a pain, but it works.

Please Log in or Create an account to join the conversation.

More
12 Oct 2012 12:01 #73818 by sicon
I think the more option on the LAN to LAN only works when its a Draytek at both ends..

When I set up this type of LAN to LAN with a netsctreen you create the one gateway but have to create the IKE Tunnel for about many remote subnets you have.
Maybe the Draytek has to work in the same way but you have the same gateway (remote end point) on each.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami