DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

vigor 3300 ipsec vpn

  • saiyen2002
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Aug 2011 10:40 #69136 by saiyen2002
vigor 3300 ipsec vpn was created by saiyen2002
I am using a vigor 3300, firmware 2.6.1.0

I am trying to connect to a ipsec vpn. The following is the specification given to me

IP Address 212.10.21.214
VPN Device Cisco ASA
Encryption Domain 10.152.24.10
Authentication Method Pre Shared Key
Encryption Scheme IKE
Diffie-Hellman Group DH Group 2
Encryption Algorithm 3DES
Hashing Algorithm SHA-1
Main or Aggressive Mode Main Mode
Lifetime (for renegotiation) 2800 seconds
Encryption Algorithm 3DES
Integrity (Hash) SHA-1
Oakley Group DH Group 2
Perfect Forward Secrecy No PFS
Lifetime (for renegotiation) 3600 seconds
Life-size in KB (for renegotiation) Not used

below are my configurations

default


advanced



general


This is the last few entries in the IPSEC log

14 00:39:02 12/06 {1_jersey}: STATE_MAIN_I1: retransmission; will wait 20s for response
15 00:38:42 12/06 {1_jersey}: STATE_MAIN_I1: retransmission; will wait 20s for response
16 00:38:32 12/06 {1_jersey}:send ISAKMP MainI1
17 00:38:23 12/06 connection {1_jersey} is added

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami