DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

No PPP Control Protocols Configured

  • kerrywales
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Jul 2011 12:33 #68721 by kerrywales
No PPP Control Protocols Configured was created by kerrywales
Hello,
I have a 2820VN at my office with latest firmware (as checked today). I use Smart VPN 4.0.0.3 to connect. All is well for most of the time. Occasionally when trying to connect I get the message

"No PPP Control Protocols Configured"

and it does not connect. If I restart (switch off then back on) the 2820 at my office all is well again.

What causes this to happen? Why do I have to keep resetting the 2820.

I have 3 remote users using Smart VPN and 3 static VPN tunnels (Draytek 2 Draytek)

The remote worker VPN is PPTP with encryption no authentication method, no to using default gateway on remote network. As I say the 2820 in the office has to be reset on average once a day. Sometimes we can go a few days without a reset then we will have to 3 or 4 in the one day.

I am trying to stabilise the connection. Can anyone help.

Regards

Kerry

Please Log in or Create an account to join the conversation.

More
26 Jul 2011 21:00 #68752 by nobody
Replied by nobody on topic Re: No PPP Control Protocols Configured
set the encryption to minimum 40Bit (on the router UI), and authentication to mschapv2 on the client.

does that help ?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami