DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Teleworker VPN cannot access LAN resources

  • draytek@topdba.co.uk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 May 2011 23:45 #67773 by draytek@topdba.co.uk
Teleworker VPN cannot access LAN resources was created by draytek@topdba.co.uk
I have set up the VPN from MAC, to a new 2920. The VPN connection is working fine on PPTP and L2TP with IPSEC.
However, while the VPN works and lets me connect to the DrayTek router, 192.168.1.1, via the VPN. I cannot connect to any other IP addresses on the LAN.

I saw one post that suggested doing a factory to resolve this problem.

Any help in identifying the incorrect setting and avoiding a full reconfiguration would be appreciated.

Please Log in or Create an account to join the conversation.

More
16 May 2011 09:18 #67776 by admin
what do you mean by "cannot connect"? e.g. ping IP address ?



Forum Administrator

Please Log in or Create an account to join the conversation.

  • draytek@topdba.co.uk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 May 2011 09:20 #67777 by draytek@topdba.co.uk
Replied by draytek@topdba.co.uk on topic Re: Teleworker VPN cannot access LAN resources
By cannot connect I mean, cannot ping, traceroute....

The IP settings of the client appear to be correct, same subnet etc.

Please Log in or Create an account to join the conversation.

More
16 May 2011 10:15 #67779 by nobody
What is the IP Address of the local network where the client is located ?
if your Subnet is also 192.168.1.0/24 you have to change the subnet on one of the sides.

Also, there is/was a firmware bug (?) in the draytek software, which appeared especially with MacOSX:
Connection was brought up, but connectivity was there for about 20 seconds. After that the connection was shown as up, but no traffic went through ist. This is about 12 month ago. I raised a ticket, but, I dont know if this ever was fixed.

Please Log in or Create an account to join the conversation.

  • draytek@topdba.co.uk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 May 2011 12:45 #67783 by draytek@topdba.co.uk
Replied by draytek@topdba.co.uk on topic Re: Teleworker VPN cannot access LAN resources
Thanks that has done the trick. The MiFi was giving out the same DHCP subnet as the target VPN network.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami