DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n + VyprVPN

  • losangeles
  • Topic Author
  • Visitor
  • Visitor
10 Feb 2011 03:59 #66184 by losangeles
2820n + VyprVPN was created by losangeles
Does anyone know if it is possible to setup the VyprVPN service directly in vigor? Please see http://www.giganews.com/vyprvpn/setup/windows-7/l2tp.html where it says that you have to set it up either on OS level or if you have a DD-WRT firmware compatible router.

Thank you in advance.

Please Log in or Create an account to join the conversation.

More
12 Feb 2011 01:30 #66224 by nobody
Replied by nobody on topic 2820n + VyprVPN
yes this works for me (draytek 2950)

You could use the VPN to route all traffic to the internet through the VPN, but, I prefer to specify either hosts or subnets.

setup a profile with PPTP, enter one of the VPN hosts for the destination, your username & password.

Then, under the TCP/IP settings,
My WAN IP: 0.0.0.0
Remote GAteway IP: 0.0.0.0
Remote Network Mask: 255.255.255.255
Local Network IP: internallan.ip.addr.ofvigor
Local Network Mask: your local network mask ( 255.255.255.0)
From first subnet to remote network, you have to do: NAT

Now under the "more" button enter the networks or hosts you want to route through the VPN.

Traffic for these will then go through the tunnel for all PCs behind the Draytek Router.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami