DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Probably a simple problem.. LAN TO LAN clients cant ping

  • the_unknown
  • Topic Author
  • Offline
  • New Member
  • New Member
More
23 Nov 2010 18:00 #64995 by the_unknown
Hello forum,

a simple problem. Ive setup a basic VPN between the office and remote site.

Office: 192.168.1.x
Remote: 192.168.2.x

Now from the office, i found that the router on the otherside was given a local IP of 192.168.1.200 along with its local address of 192.168.2.1. Accessing that from the office gvies me access to its control panel interface. This means that the vpn is active.

However, when i connect a client remotely they cannot ping the office network at all. The client can't even ping the office router. If i ping from the remote draytek however it can ping the office network.

Any ideas, i must have missed somthing thats all.

Thanks,
The_Unknown

Please Log in or Create an account to join the conversation.

More
26 Nov 2010 18:38 #65034 by candl

Now from the office, i found that the router on the otherside was given a local IP of 192.168.1.200


That's not right , check that on both ends , in the VPN configuration, TCP/IP Network Settings that 'From first subnet to remote network, you have to do' is set to Route and not NAT

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami