DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Allow visitors to oubound vpn

More
29 Oct 2010 11:43 #64559 by ericl
Allow visitors to oubound vpn was created by ericl
We have a Vigor 2820 setup on our corporate network as firewall/router.

Incoming VPN connections are fine.

I would like to allow visitors outbound vpn. Is this just a matter of opening port 1723 or is it more complicated? I do not want to disrupt the incoming vpn settings.

I have had a look at the vpn passthrough document but as we dont have a vpn server not sure what I would need to do.

Thanks in advance

Please Log in or Create an account to join the conversation.

More
03 Nov 2010 11:53 #64651 by neildavis
Replied by neildavis on topic Allow visitors to oubound vpn
We had this problem. Contacted dtek support in the end and they said this:


To allow Dial-out IPSec VPN, you need to run a command on the Vigor2820. Telnet to it and run a command as follows:

>srv nat ipsecpass on

This would allow the VPN client behind the Vigor2820n to connect to
the remote VPN server.

Please Log in or Create an account to join the conversation.

More
03 Nov 2010 14:34 #64664 by lozstlouis
Replied by lozstlouis on topic Allow visitors to oubound vpn
Isn't TCP 1723 PPTP?

www.alits.co.uk

Please Log in or Create an account to join the conversation.

More
05 Jan 2011 11:02 #65464 by qwaz01
Replied by qwaz01 on topic Allow visitors to oubound vpn
I have the same issue.

We used to be able to PPTP outbound VPN but since a firmware upgrade to 3.3.4.1_232201 on our 2820n we have been unable to connect.

I have tried with both VPN turned on and off on the router and the suggested srv nat ipsecpass on but i still cant get it to connect.

Any ideas???

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami