DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n question.

More
23 Sep 2010 12:40 #63941 by candl
Replied by candl on topic 2820n question.
If it helps...
I have a pair of 2820's running an IPsec LAN-LAN VPN between 2 sites.
Enabling PPTP and configuring for a remote user had no effect on the IPSec VPN.

Please Log in or Create an account to join the conversation.

More
23 Sep 2010 19:55 #63946 by njh
Replied by njh on topic 2820n question.

exprmicri wrote:

rpg wrote: From the 2820 GUI just go to "VPN and Remote Access -> Remote Access Control" and enable the protocol you wish to use; PPTP is easiest !



will enabling another protocol have any affect on the vigor to vigor vpn tunnel currently connecting my bosses house network and the office?

TIA

H


A minor effect if it is anything like my 2900 is that it will force a router reboot, so the other tunnels will drop for a few moments.

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

  • exprmicri
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
01 Oct 2010 16:20 #64051 by exprmicri
Replied by exprmicri on topic 2820n question.
how long does a reboot take?

long enough for my users not to notice? in fact i'll do it at 5pm as i'll be the only one on internet at that time anyway so won't make a difference.

cheers folks.

Please Log in or Create an account to join the conversation.

More
01 Oct 2010 17:59 #64052 by njh
Replied by njh on topic 2820n question.
A reboot only takes a few seconds (3-5)

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

  • exprmicri
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Oct 2010 14:01 #64249 by exprmicri
Replied by exprmicri on topic 2820n question.
ok, so have enabled the required prtocols, created some user accounts but when i try to log in from home (typing ip address :8080 into browser) i get nowhere. i can log into the admin console by entering the admin username and password but when i enter one of the created user accounts i get a not autheticated error message.

can someone write donw the exact steps i should follow from turning on the pptp protocol to being able to log in to my domain remotely.

Many thanks.

Please Log in or Create an account to join the conversation.

More
21 Oct 2010 18:34 #64355 by lozstlouis
Replied by lozstlouis on topic 2820n question.
You get this nailed?

www.alits.co.uk

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami