DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Dual Wan VPN's

  • allanmcc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Aug 2010 16:42 #63410 by allanmcc
Dual Wan VPN's was created by allanmcc
Hi All

Can anybody advise me if it is possible to use both Wan ports for VPN remote access. All my remote workers use Wan1 but I would like to be able to dial in using Wan2 which has a much faster connection, but keep the others on Wan1.

Thanks for any advice.

Please Log in or Create an account to join the conversation.

More
18 Aug 2010 18:01 #63411 by voodle
Replied by voodle on topic Dual Wan VPN's
Use the WAN2 IP address to connect as a dial-in user rather than WAN1's IP :) That should get you connected using WAN2

Please Log in or Create an account to join the conversation.

  • allanmcc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Aug 2010 19:30 #63412 by allanmcc
Replied by allanmcc on topic Dual Wan VPN's
Thanks for your quick answer. I have already tried this but the vpn just will not start a connection.

Please Log in or Create an account to join the conversation.

More
19 Aug 2010 08:47 #63414 by rpg
Replied by rpg on topic Dual Wan VPN's
Which Draytek router are you using and what are you using for your second WAN2 connection?

If you are using a second ADSL on WAN2 then you may need to do some port forwarding to the main router.

Please Log in or Create an account to join the conversation.

More
19 Aug 2010 10:45 #63419 by voodle
Replied by voodle on topic Dual Wan VPN's
That's a good point, if the WAN2 connection is going through another router, you'll need to check whether that router support VPN pass-through and use the 2820's WAN2 IP as the DMZ IP on that router.

Please Log in or Create an account to join the conversation.

  • allanmcc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 Aug 2010 18:56 #63453 by allanmcc
Replied by allanmcc on topic Dual Wan VPN's
Thanks guys, I am using the Draytek 2950 with Vigor 100 on Wan1 and BT's new Fibre Broadband on Wan2 with the connection coming directly from BT's Open Reach modem. I have not used their 2Wire Router.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami