DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Restrict WAN2 to VPN taffic only?

More
12 Jul 2010 13:13 #62813 by jtay
Restrict WAN2 to VPN taffic only? was created by jtay
Hi,

I was wondering if there was a way to restrict WAN2 to be used for VPN traffic only?

We have two links and I want WAN1 to be used for internet access and WAN2 reserved for VPN usage.

Is this possible with the Vigor2820 or will I need to run two routers?

Please Log in or Create an account to join the conversation.

More
12 Jul 2010 17:32 #62815 by voodle
Replied by voodle on topic Restrict WAN2 to VPN taffic only?
To do that, you would need to make a load balance policy (under the WAN menu) and create a rule to force all traffic through WAN1 first:
protocol: any
WAN: WAN1 - leave auto failover ticked
leave everything else blank and click OK.

Then set up the VPN connection - either LAN to LAN to dial-in user to connect using the WAN2 IP address, if it's dial-out then set the VPN Dial-Out Through setting to WAN2 so it connects using that.
That way, all internet traffic will go through WAN1 but any VPN traffic will go through WAN2.

Please Log in or Create an account to join the conversation.

More
04 Aug 2010 09:52 #63137 by cabot
Replied by cabot on topic Restrict WAN2 to VPN taffic only?
Thanks Voodle

you have answered my question from another post as well using the load balanceing has resolved the issue i had

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami