DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VPN for selected LAN clients

  • aht2000
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Jun 2010 16:59 #62316 by aht2000
VPN for selected LAN clients was created by aht2000
Hello,
I have a VPN PPTP connection running on my Vigor 2020vn. I have "Change default route to this VPN tunnel ( Only single WAN supports this )" checked, and "From first subnet to remote network, you have to do" = NAT.

Based on the above, all traffic from my LAN is routed through VPN.

However, what I need is to only allow one or two specific clients on my LAN to have their traffic go through the VPN connection running on the Vigor while remaining LAN clients\ traffic go through normally to the internet.

Is this possible? If yes, then how?

Thank you in advance.

Please Log in or Create an account to join the conversation.

  • aht2000
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Jun 2010 21:16 #62383 by aht2000
Replied by aht2000 on topic VPN for selected LAN clients
Hello,
I understood that what I need is available through split Tunneling. Does the Vigor 2820vn support this feature? If yes, then how.

Please Log in or Create an account to join the conversation.

More
16 Jun 2010 21:33 #62384 by voodle
Replied by voodle on topic VPN for selected LAN clients
There isn't really a way to do that for specific clients since the VPN gateway setting is for everything going through the router - you'd need to use individual VPN connections from those computers so that they'll use the VPN as the gateway.
Split tunneling just means having the VPN connection up but not using it as the gateway, which is a security risk with some networks.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami