DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Lan to Lan connected no ping or access

  • pmccowat
  • Topic Author
  • Offline
  • New Member
  • New Member
More
06 Jan 2010 14:03 #59672 by pmccowat
Replied by pmccowat on topic Lan to Lan connected no ping or access
Tried this firmware and still no joy.

Next step I was going to try was to go to 3.3.0 firmware and restore config of working router.

Also, both these clients are a good distance from exchange, this is the ADSL info for the router in case relevant.

ADSL Information ( ADSL Firmware Version: 232201_A)
ATM Statistics TX Cells RX Cells TX CRC errs RX CRC errs
642689 835107 1 67

Below is the VPN status with office IP blanked out.

VPN Connection Status
Current Page: 1 Page No.
VPN Type Remote IP Virtual Network Tx Pkts Tx Rate(Bps) Rx Pkts Rx Rate(Bps) UpTime
1
( Office ) IPSec Tunnel
3DES-SHA1 Auth xxx.xxx.xxx.xxx
via WAN1 192.168.16.0/24 5 3 1 3 13:22:48

Please Log in or Create an account to join the conversation.

More
06 Jan 2010 21:22 #59681 by lozstlouis
Replied by lozstlouis on topic Lan to Lan connected no ping or access
What Sonicwall? I run a few PRO2040 with 2820s & 2800s. Sonicwall VPN is bit of a pig at bringing the connections up. Often I find the Sonicwall needs the kick & not the Drayteks. Try unticking & then reticking the "keep alive" box under the "advanced" tab of the VPN connection in the Sonicwall.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

  • pmccowat
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Jan 2010 10:46 #59688 by pmccowat
Replied by pmccowat on topic Lan to Lan connected no ping or access
It's a TZ180.

Tried that with the "keep alive" and still no luck.

Sonicwall VPN stats show packets in but none out. Wonder if something is blocking incoming traffic on Draytek?

Please Log in or Create an account to join the conversation.

More
08 Jan 2010 14:38 #59715 by lozstlouis
Replied by lozstlouis on topic Lan to Lan connected no ping or access
Shouldn't be. Must be something in the routing... A trace route doesn't give any clues I suppose?

www.alits.co.uk

Please Log in or Create an account to join the conversation.

More
01 Feb 2010 19:14 #60240 by activetech
Replied by activetech on topic Any luck with this?
This sounds similar to my issue.
I am trying to set up a site to site vpn using:
1x RRAS @ H/O
1x2820n @ Branch

I can get a connection, but cannot access any network resources (using name or IP).

I'd be greatful to hear if you have managed to resolve this.

Many thanks
Gavin

Please Log in or Create an account to join the conversation.

  • pmccowat
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Feb 2010 16:29 #60496 by pmccowat
Replied by pmccowat on topic Lan to Lan connected no ping or access
Sorry for the delay in posting.

Have had to give up in this and use the Sonicwall VPN Client for a bit.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami