DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

LAN to LAN on Vigor2820

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Aug 2009 10:55 #57219 by testsubjec
LAN to LAN on Vigor2820 was created by testsubjec
Hi folks,

I have got two Vigor 2820 configured to use a LAN to LAN VPN (PPTP).

Router 1 IP: 192.168.10.254
Router 2 IP: 192.168.11.254

After doing an IP audit I came across an IP address of 192.168.10.202 and this turns out to be Router 2.

I want to know why, and also is there anyway I can change this as I have gone through both routers and cannot find anything relating to this IP.

Many thanks

Please Log in or Create an account to join the conversation.

More
14 Aug 2009 15:42 #57223 by macavity
Replied by macavity on topic LAN to LAN on Vigor2820
It's set in VPN - PPP General Setup

The setting Assigned IP Range defines from what range the IP is allocated. Always starts two higher than the IP defined.

Router 1 Allocates router 2 an IP as part of IPCP when the VPN establishes.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami