DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820Vn LAN-LAN routing issues

  • 1tsolutions
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Jul 2009 16:28 #56639 by 1tsolutions
2820Vn LAN-LAN routing issues was created by 1tsolutions
We have a couple of 2820Vn routers at two sites in the UK (we'll call these sites A and B).
One UK site (Site A) dials the other UK site (Site B) over PPTP fine.
Both UK sites (A and B) dial over IPsec to a Sonicwall in the US with no problems.
The routing table generated on the 2820s is a bit hit-and-miss. Sometimes, the 2820s generate circular routes trying to reach the network at Site C in the US.
This appears to depend on the order the VPNs were started.
Is there any way of configuring the VPNs with static routes so the circular routes aren't generated?

Thanks,
- Andrew

Please Log in or Create an account to join the conversation.

More
09 Jul 2009 14:28 #56657 by admin2
Replied by admin2 on topic 2820Vn LAN-LAN routing issues
Try setting the RIP Direction to disabled in all the VPN profiles and then reboot both routers to clear the routing table. It may be RIP communication between the router routers is causing the loop.

Please Log in or Create an account to join the conversation.

  • 1tsolutions
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Jul 2009 19:03 #56667 by 1tsolutions
Replied by 1tsolutions on topic 2820Vn LAN-LAN routing issues
Thanks - I'll do that.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami