DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 VPN passthrough - 3.3.0 firmware broke it?

  • dominic fitzpatrick
  • Offline
  • New Member
  • New Member
More
10 Jul 2009 10:34 #56663 by dominic fitzpatrick
Replied by dominic fitzpatrick on topic 2820 VPN passthrough - 3.3.0 firmware broke it?
Any idea where I can get Firmware 3.2.1?

We just got a 2820Vn and the broken passthrough is a nightmare as several of our customers have Sonicwall firewalls.

I have tried the random fiddling above but no luck :)

EDIT: I found firmware 3.2.1 and I now have this working.

I have an open ticket with Draytek, so i will forward them this thread.

Please Log in or Create an account to join the conversation.

More
22 Jul 2009 18:03 #56838 by s80_uk
I had trouble getting my Cisco VPN client working through a 2100Vn router with 3.3.0 firmware. After some scratching around I found that there is a telnet command...

Code:
srv nat ipsecpass on

This is all that was needed in my case.

Please Log in or Create an account to join the conversation.

More
31 Jul 2009 16:28 #56963 by nutella69
Replied by nutella69 on topic 2820 VPN passthrough - 3.3.0 firmware broke it?
Tried the 3.3.2 (stable) firmware now and the problem still exist :?

If you disable a service in the "VPN and Remote Access >> Remote Access Control Setup" tab you'll get a brick !!

:evil:

Please Log in or Create an account to join the conversation.

More
06 Aug 2009 10:46 #57034 by robm
Had problems with the Sonicwall GVPN client with 3.3.1.2, so downgraded to 3.2.1 - which worked.

Unfortunately then had the problem with the Cisco client (even on 3.2.1)
But running the following command on the router fixed the Cisco client on both firmwares.

Code:
srv nat ipsecpass on


Well found S80_UK!

Just need to try the Sonicwall via the 3.3.1.2 firmware.

Update 11/08/09 - initial testing with the Sonicwall client shows this command fixes the problem.

Please Log in or Create an account to join the conversation.

More
18 Aug 2009 10:57 #57264 by bluefox
I've got the same problem here but allowing ipsec passthough didn't work for me.

Could anyone tell me where to download the old 3.2.1 firmware from?

Please Log in or Create an account to join the conversation.

  • dominic fitzpatrick
  • Offline
  • New Member
  • New Member
More
26 Aug 2009 10:34 #57401 by dominic fitzpatrick
Replied by dominic fitzpatrick on topic 2820 VPN passthrough - 3.3.0 firmware broke it?
Checking back to see if any fixes, but no luck it seems.

Firmware 3.2.1 is available from ftp://ftp.draytek.com/Vigor2820/

or follow links from http://www.draytek.co.uk/support/ to the International FTP site.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami