DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Logging into wrong router on VPN

  • davidreger
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 May 2009 21:04 #56113 by davidreger
Logging into wrong router on VPN was created by davidreger
I have just replaced a Vigor 2800 with a new 2820n (it failed in service). I have a Vigor 2600 at the other end of the VPN. The routers are 192.168.0.2 and 192.168.1.1 both using port 8080 for admin. When the VPN tunnel is not there ie the ADSL in not connected I can log onto the 2820n fine but when the VPN tunnel is made I connect onto the Vigor 2600 at the other end! Weird or what? I just can't figure out what's going on and have tried various setting but to no avail. Any ideas? - changing the admin port of the 2820n doesn't work - it can't find the page when the VPN tunnel is made.

Please Log in or Create an account to join the conversation.

  • davidreger
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 May 2009 22:37 #56114 by davidreger
Replied by davidreger on topic Logging into wrong router on VPN
This is what happens if you don't put 0.0.0.0 in My WAN IP and Remote gateway IP on the Lan to Lan set up!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami