DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IPSec Lan --> Lan cannot ping

  • jamesnahon
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 May 2009 15:06 #55942 by jamesnahon
IPSec Lan --> Lan cannot ping was created by jamesnahon
Hi there,
i have followed this guide on how to create IPSec site to site VPN. I am using a 2600 at the head office and a 2820 and the remote site.

the remote site is on 192.168.3.0 and the head office on 192.168.4.0

i am only able to ping from the remote site to the head office, and even then - only the vigor (not any hosts inside the network). i cannot ping across the VPN at all from the head office.

on the 2820, there is an option that defines what to do when with traffic from first subnet to tries to reach the second subnet. i have set it to route - but there is no such option on the 2600.

do i need to add a static route?

thanks for your help!

J

Please Log in or Create an account to join the conversation.

More
28 Jul 2009 09:31 #56906 by papazulu
Replied by papazulu on topic IPSec Lan --> Lan cannot ping
I had the same problem, but in the end I realised that it was the windows firewall on the PC which I was using for testing was stopping the ping reply.

Switching off the PC firewall sorted it out.

Please Log in or Create an account to join the conversation.

More
28 Jul 2009 11:56 #56911 by njh
Replied by njh on topic IPSec Lan --> Lan cannot ping
Can you check your subnet netmasks at each end of the tunnel?

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami