The UK Vigor 130 is a modem only, the Quick Start Guide is located here >>
https://www.draytek.co.uk/support/downloads/vigor-130
Thank you for purchasing this DrayTek Vigor 130 DSL modem. It provides
compatibility with ADSL and VDSL lines, outputting to a single Gigabit
(1000BaseT) Ethernet port. Throughout this guide, when we refer to DSL
or xDSL, that means either VDSL (FTTC) or ADSL/ADSL2+.
The Vigor 130’s primary function is as a transparent bridge modem for
xDSL services – not as a router/firewall in itself. It connects a secondary
router or other device to your DSL line, where that device does not directly
support DSL itself.
As a bridge, the Vigor 130 only provides the physical conversion from
xDSL (ADSL or VDSL) to Ethernet and all firewalling, routing or other
advanced routing functions are managed by your secondary device (a
separate router, firewall etc.). The secondary device may also be a single
PC, a PC-based software router or an Apple Airport™ type device.
The Vigor 130 comes preconfigured for most UK ISPs. Therefore, in most
cases you do not need to perform any setup of the Vigor 130 at all. You only
need to physically connect it (plug it in) and then configure your connected
router/firewall. Your ISP username and password go into your router, not the
Vigor 130, which just acts as the DSL-to-Ethernet bridge.
It sounds like you have downloaded a user manual for the router model used in other countries.
