DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can't upgrade firmware on 2600+

  • pete_thomson
  • Topic Author
  • Offline
  • New Member
  • New Member
More
24 Mar 2006 12:01 #31977 by pete_thomson
Can't upgrade firmware on 2600+ was created by pete_thomson
Hello,

I'm trying to uprade the firmware to resolve a couple of odd issues.
I've downloaded the firmware and the update software.

Everything appears to go well until about 60% way through (which takes about 15 minutes to get to) I get a timeout and it aborts.

I've upped the timeout to 900 secs as per another thread, I've d/l'd the firmware and software again, just incase.
All the lan ports are disconnected, except the machine doing the upgrade.

Half a dozen attempts have failed.

The router was connected to the internet at the time, should it be disconnected??


Any help is appreciated.


Pete

Please Log in or Create an account to join the conversation.

More
17 Jan 2012 15:38 #70813 by karl427
Replied by karl427 on topic Re: Can't upgrade firmware on 2600+
6 years later and I'm getting the same problem on an old 2600+ going from 2.5.4 to 2.5.9.

Has anyone found a work 'round?

Much appreciated.

Please Log in or Create an account to join the conversation.

More
17 Jan 2012 15:54 #70814 by nealuk
Replied by nealuk on topic Re: Can't upgrade firmware on 2600+
Can you get to 2.5.6 from 2.5.4? Then try going from 2.5.6 to 2.5.9 ? Regards, Neal.

2.5.6 at: ftp://ftp.draytek.com/Vigor2600/Firmware/V2.5.6/

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami