Hi

I'm getting the IPC6023 error when watching sky sports, tnt sports etc. Seems fine on channels like BBC HD.

The HD sports channels work for about 5 mins and then the error appears. I can change channel and then return to the channel which works straight away but the error re-appears again after a few mins. Sometime the error disappears and the channel works again without any intervention.

The tv is connected by ethernet cable and when I do a speed test using a laptop using the same cable I'm getting 900Mbs

I have the latest firmware installed 3.9.9.7_BT

The IGMP is enabled including snooping.

When I use the supplied BT router all is fine so I assume I either have a setting wrong or the router is not up to it.

Any help would be much appreciated.

Cheers

Mike V.

Hi Mike,

Have you tried switching to wireless and disconnecting the ethernet cable? Sounds backwards I know but, some people are reporting this as a solution to that error code.

It will most likely be a specific settings, as you say, which the BT router probably caters to. The vigor router will probably not have this specifc setting active by default.

I would not want to suggest any settings for fear of opening up your router to the outside world, but, UPNP might be worth a quick hard-and-fast test to see if it solves the error msg issue. I would then disable it again and investigate further.

Lots of people have this same error and not with just DrayTek equipment.


Just a couple of suggestions to try...