DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Migrate DrayTek 2960 config to 2962

  • rickysuper
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Sep 2024 08:14 - 18 Sep 2024 08:15 #103870 by rickysuper
Migrate DrayTek 2960 config to 2962 was created by rickysuper
Bought the Draytek 2962 to replace the existing 2960. If it is possible to migrate the config from 2960 to 2962 using the simple config backup? If not any possible method or I have to setup from scratch ?

Thanks in advance.

Last edit: 18 Sep 2024 08:15 by rickysuper.

Please Log in or Create an account to join the conversation.

More
18 Sep 2024 12:09 #103872 by HodgesanDY
Replied by HodgesanDY on topic Migrate DrayTek 2960 config to 2962
Hi,

If it’s a new out-of-the-box unit, why not just try to restore the config that you backed up from the 2960, and see what gets restored. You can always make a backup of the new one’s current config before restoring the old config onto it.

You could do this as a bench test too, without actually hooking it up to the network. If it doesn’t like the config, then yes, you would need to start from scratch or beg DrayTek support to migrate the config for you, manually; they have done this for us in the past before, and others too I think, but I doubt they like having to do it.


Good luck!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami