I have a 2860LN working fine from LAN 1 and assigning dhcp to any devices connected direct or via a network switch connected to it however how do i configure ports 2-6 to work on the same subnet so any device i plug in will connect and receive a dhcp address on the same subnet/network as LAN 1.

If you haven't enabled VLANs aren't all the ports on LAN 1 by default? (long time since I had a config without VLANS so my memory may be wrong :wink: )

If you have enabled VLANS then just tick which ports you want to be on LAN 1

Or am I missing something?