DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Firmware for Vigor130
- timjam
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
22 Aug 2023 08:01 #102775
by timjam
Firmware for Vigor130 was created by timjam
Hi,
I like in the uk and and am about to change my broad band supplier to Bonline who are I think an OpenReach reseller.
My
packages is 'fiber' to the box predicted speak of 74mbs
Ive got my own router with FreshTomato and plan to use a Vigor130 as a modem
Two question if I may:
1) Which version of the frim ware should I flash to the modem?
it's a Vigor130, Annex A S/N 15C002857976
I looked at download but there seem to be diferent option and I wasn't sure which to use.
2) And particular setting I shoudl be usign to set up the modem that Bonline might not tell me about in there infomation...
Thanks for any help
Tim
I like in the uk and and am about to change my broad band supplier to Bonline who are I think an OpenReach reseller.
My
packages is 'fiber' to the box predicted speak of 74mbs
Ive got my own router with FreshTomato and plan to use a Vigor130 as a modem
Two question if I may:
1) Which version of the frim ware should I flash to the modem?
it's a Vigor130, Annex A S/N 15C002857976
I looked at download but there seem to be diferent option and I wasn't sure which to use.
2) And particular setting I shoudl be usign to set up the modem that Bonline might not tell me about in there infomation...
Thanks for any help
Tim
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
Less
More
- Posts: 1193
- Thank you received: 7
22 Aug 2023 08:30 #102776
by piste basher
Replied by piste basher on topic Re: Firmware for Vigor130
Firstly, I would set everything up and check that it's working before flashing any firmware.
If your ISP is an Openreach reseller then you shouldn't need to do anything to the 130, it should "just work" out of the box, provided you have put the correct settings in your router.
If you do feel the need to flash the firmware, and it is not already on the current version 3.8.5.1, then the 3.8.5.1 BT version should be correct, with no need for the alternative version.
Is it possible that you are over-thinking this?
If your ISP is an Openreach reseller then you shouldn't need to do anything to the 130, it should "just work" out of the box, provided you have put the correct settings in your router.
If you do feel the need to flash the firmware, and it is not already on the current version 3.8.5.1, then the 3.8.5.1 BT version should be correct, with no need for the alternative version.
Is it possible that you are over-thinking this?
Please Log in or Create an account to join the conversation.
- timjam
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
23 Aug 2023 14:53 #102781
by timjam
Replied by timjam on topic Re: Firmware for Vigor130
Him
Thanks for that.
It's a second hand router that got bricked so I'm going to be doing TFTP on it anyway to recover.
Wish me luck!
Tim
My service starts on Friday so can't test till then
Thanks for that.
It's a second hand router that got bricked so I'm going to be doing TFTP on it anyway to recover.
Wish me luck!
Tim
My service starts on Friday so can't test till then
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek