DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Release Schedule
- nickul
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
04 Apr 2023 22:17 #102390
by nickul
Release Schedule was created by nickul
My trusty old Vigor 2850 has done sterling service over the last ten years but it time for an upgrade.
When I bought it, little did I know that about a month later Draytek released the 2860....
So I'm considering a 2866AX. Is anybody aware if draytek publish, or follow a known release schedule, i.e. are they on the cusp of releasing the next model this spring/summer?
thanks
Nick
When I bought it, little did I know that about a month later Draytek released the 2860....
So I'm considering a 2866AX. Is anybody aware if draytek publish, or follow a known release schedule, i.e. are they on the cusp of releasing the next model this spring/summer?
thanks
Nick
Please Log in or Create an account to join the conversation.
- pharcyder
- Offline
- Member
Less
More
- Posts: 165
- Thank you received: 1
05 Apr 2023 10:44 #102393
by pharcyder
Replied by pharcyder on topic Re: Release Schedule
The 2865/2866 has been out for quite a while now. Ofcourse something will be coming next but there's been no announcements. I've always had a positive experience emailing the Sales team at Draytek UK about imminently released products so try them.
FWIW, the 2865/66 will perform at gigabit speeds for WAN connectivity except for some (most?) VPN connections. I find IKEv2 connections capped at 160Mb/s (ish) except IPSec connections that don't use NAT-T as these are accelerated.
Do you need more than that?
FWIW, the 2865/66 will perform at gigabit speeds for WAN connectivity except for some (most?) VPN connections. I find IKEv2 connections capped at 160Mb/s (ish) except IPSec connections that don't use NAT-T as these are accelerated.
Do you need more than that?
Please Log in or Create an account to join the conversation.
- nickul
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
08 Apr 2023 16:53 #102397
by nickul
Replied by nickul on topic Re: Release Schedule
No I don't need those speeds for the VPNs, but the 2850 firewall throughput is limiting my broadband, at 100Mbps down and about 70 up, a new model should sort that. Interestingly if I switch the data monitor on it slows down a bit more, i.e. down to 80 ish.
Looking through the newsroom on the .com site, gives the following, (bit tricky to get the exact laucnh date in some cases) , for the 28 series;
Model Launch
2866 29/09/21
2865 15/01/20
2862 07/06/17
2860 07/10/13
Looking through the newsroom on the .com site, gives the following, (bit tricky to get the exact laucnh date in some cases) , for the 28 series;
Model Launch
2866 29/09/21
2865 15/01/20
2862 07/06/17
2860 07/10/13
Please Log in or Create an account to join the conversation.
- pharcyder
- Offline
- Member
Less
More
- Posts: 165
- Thank you received: 1
- haywardi
- Offline
- Member
Less
More
- Posts: 187
- Thank you received: 0
13 Apr 2023 16:29 #102425
by haywardi
Iain
Replied by haywardi on topic Re: Release Schedule
Not strictly relevant, but I went from the 2862 to the 2927.
The 2927 had much greater throughput, but unfortunately had to be returned as LAN DNS did not work properly.
Therefore a 2850 to 2866, you should see a considerable improvement.
The 2927 had much greater throughput, but unfortunately had to be returned as LAN DNS did not work properly.
Therefore a 2850 to 2866, you should see a considerable improvement.
Iain
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek