DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2862 VPN

  • tfgst
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Feb 2023 00:31 #102185 by tfgst
2862 VPN was created by tfgst
My LAN address is 192.168.2.0 via LAN 1 and I have set up a remote dial in VPN user to use LAN 2 which has an address of 192.168.1.0.

Questions:

1. Is there anyway in which the remote user can access 2.0? - it is imperative they do not have any access.

2. If isolation does not occur per point 1, how can I ensure they are blocked from having access to 2.0? I have set up a firewall rule, using object, with object one being 1.0 as the source IP and object 2 as being the destination IP. The direction is LAN > LAN and the filter is block immediately.

Please Log in or Create an account to join the conversation.

More
09 Feb 2023 17:54 #102189 by piste basher
Replied by piste basher on topic Re: 2862 VPN
Provided you don't enable Inter LAN routing (on the LAN General setup page) between 1 and 2 then as far as I'm aware a user with an address assigned in LAN 1 would not be able to access anything in LAN 2.

No need for Firewall rules or anything else.

Please Log in or Create an account to join the conversation.

  • tfgst
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Feb 2023 18:52 #102190 by tfgst
Replied by tfgst on topic Re: 2862 VPN

Piste Basher wrote:
Provided you don't enable Inter LAN routing (on the LAN General setup page) between 1 and 2 then as far as I'm aware a user with an address assigned in LAN 1 would not be able to access anything in LAN 2.

No need for Firewall rules or anything else.



Perfect, thank you very much.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami