DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Using POE to power a Draytek 2620LN

More
05 Dec 2022 10:30 #102044 by nigef
I have a Draytek 2620LN running in LTE bridged mode connected to a Draytek 2682 which acts as the router for my local home network.
I would like to use POE down the Ethernet cable joining to 2682 to 2620LN by using an injector and splitter to obtain the 12v required to power 2620LN.
Is this OK, I see no reason why not, but sensible to ask others before damaging the equipment.

Please Log in or Create an account to join the conversation.

More
14 Dec 2022 11:36 #102067 by paddyclk
Replied by paddyclk on topic Re: Using POE to power a Draytek 2620LN
It should work as long as you have the correct diameter pin and output on your injector.

Please Log in or Create an account to join the conversation.

More
11 Jan 2023 21:11 #102106 by haywardi
Replied by haywardi on topic Re: Using POE to power a Draytek 2620LN
Oh, what a good idea! Hadn't thought of this.

Whilst my installation is not the same, I have a poe switch, with the right splitter it should work just fine if yours works

Please let me know how you get on and I would also appreciate knowing where you got your splitter from so I can get one.

Thanks in advance
Iain

Iain

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 21:14 #102220 by jonathanattwood
Replied by jonathanattwood on topic Re: Using POE to power a Draytek 2620LN
I use one each of these for a number of routers.

https://www.amazon.co.uk/dp/B08HS4NT13?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.co.uk/gp/product/B07M7JWC67/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

The right-angle plug isn't for the right-angle but ensures the power plug fits the router. (The plug on the splitter is not quite the right size for the Drayteks).

Note, this splitter at 2A is underpowered for the 2865Lac which needs 2.5A but works with many others I've tried it with.

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 21:30 #102221 by haywardi
Replied by haywardi on topic Re: Using POE to power a Draytek 2620LN
Cool thank you.
I use 2862's, so I will check it their power requirements 👍👍👍

Iain

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami