DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2927ac displays management page from outside my network .

  • garob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Nov 2022 17:55 #102033 by garob
Odd issue .

Model Name Vigor2927ac
Firmware Version 4.4.2

I have disabled by unticking the box "Allow Management From the Internet" but still I can see the management page .

I have set port 80 and 443 to forward to my web server and chnaged and SSL 443 settings to another port . I have tried opening
port 80 to point to the web server also to no avail .

I have also Deselected Enable SSL VPN Service in VPN and Remote Access >> Remote Access Control Setup page.
and Modified the Port for SSL VPN Service from default port 443 to the other one on SSL VPN >> General Setup page.

HELP! Does not make sense . What am I missing Router bods ?

Please Log in or Create an account to join the conversation.

More
27 Nov 2022 14:44 #102034 by piste basher
Although you can see the management page, can you actually do anything with it? I seem to recall noticing this but found that I couldn't get past the page.

Please Log in or Create an account to join the conversation.

  • garob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Nov 2022 18:11 #102035 by garob
Dear Piste

You're right . I cannot log onto the managment console . It just refreshes back to the log on screen . V weird .

Anyone able to help?

Please Log in or Create an account to join the conversation.

  • garob
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Nov 2022 18:45 #102036 by garob
Have set the router to be managed for the internet on port 8080 . I can log on with the admin account .

The router still hogs port 80 though with NAT and open port meant to be forwarding to my webserver .

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami