DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2620 DMZ / Watchguard

  • willsmyth00
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Oct 2022 16:17 #101907 by willsmyth00
Vigor 2620 DMZ / Watchguard was created by willsmyth00
Hi
I have a Watchguard T20W to configure behind a Vigor 2620. Normally when working with BT Business Hubs I would create a DMZ and place the Watchguard in the DMZ by IP address. For all intents and purposes the BT router becomes invisible to the Watchguard for both inbound and outbound traffic. This is not the case with the Vigor 2620. Are there other steps to allow the Vigor 2620 to operate in this way - in effect as a passthrough device?
Thanks in advance.

Please Log in or Create an account to join the conversation.

More
18 Oct 2022 17:25 #101909 by j1mbo
Replied by j1mbo on topic Re: Vigor 2620 DMZ / Watchguard
PPPoE passthrough: https://www.draytek.com/support/knowledge-base/4910

Please Log in or Create an account to join the conversation.

  • willsmyth00
  • Topic Author
  • Offline
  • New Member
  • New Member
More
20 Oct 2022 13:08 #101917 by willsmyth00
Replied by willsmyth00 on topic Re: Vigor 2620 DMZ / Watchguard
I have enabled pppoe pass thru and set the user credentials in the Watchguard but get no Internet access

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 13:38 #101928 by j1mbo
Replied by j1mbo on topic Re: Vigor 2620 DMZ / Watchguard
Did you set the VLAN tag correctly? Also what does the WatchGuard log show? WG support are super helpful btw, might be worth raising a ticket with them.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami