DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

4.4.2 on 2927

More
03 Aug 2023 12:47 #102717 by j1mbo
Replied by j1mbo on topic Re: 4.4.2 on 2927

StevePritchard wrote:
I've raised a support ticket because, as far as I can determine, I'm not really doing anything special with my 2927. I am hitting a limit around 500Mbps (normally around 480MBps), but if I connect direct to the ONT then I'm getting 800Mbps+.



How is this being tested?

If connected directly to the ONT, the device would need a PPPoE client to establish the connection to your ISP and hence use your assigned IP Profile.

Please Log in or Create an account to join the conversation.

More
03 Aug 2023 18:59 #102718 by stevepritchard
Replied by stevepritchard on topic Re: 4.4.2 on 2927

J1mbo wrote:

StevePritchard wrote:
I've raised a support ticket because, as far as I can determine, I'm not really doing anything special with my 2927. I am hitting a limit around 500Mbps (normally around 480MBps), but if I connect direct to the ONT then I'm getting 800Mbps+.



How is this being tested?

If connected directly to the ONT, the device would need a PPPoE client to establish the connection to your ISP and hence use your assigned IP Profile.


Sorry, I'm a bit confused. I connected my laptop direct to the ONT with (if memory serves) the Windows PPPoE client and got 800+, but I can't get more than 480 through the 2927.

I've tried the enabling and disabling of bits and bobs (it's a while ago now, so I forget the details, but I've followed the different recommendations). It's pretty much a bog standard config, so I can't think what is causing the problem.

Draytek took my config, and couldn't find an issue, and to investigate further they need to have remote access and I'm just not able to sync up a time when I'm around.

Please Log in or Create an account to join the conversation.

More
03 Aug 2023 19:13 #102719 by j1mbo
Replied by j1mbo on topic Re: 4.4.2 on 2927
Gotcha. Other than setting the MTU on the PPPoE config page to 1500 bytes there's nothing else really to do.

Please Log in or Create an account to join the conversation.

More
03 Aug 2023 19:50 #102720 by stevepritchard
Replied by stevepritchard on topic Re: 4.4.2 on 2927

J1mbo wrote:
Gotcha. Other than setting the MTU on the PPPoE config page to 1500 bytes there's nothing else really to do.



I'm set to 1492. That's what the auto detect determines.

Please Log in or Create an account to join the conversation.

More
03 Aug 2023 20:18 #102721 by j1mbo
Replied by j1mbo on topic Re: 4.4.2 on 2927
Which ISP?

Please Log in or Create an account to join the conversation.

More
04 Aug 2023 05:38 #102722 by stevepritchard
Replied by stevepritchard on topic Re: 4.4.2 on 2927

J1mbo wrote: Which ISP?


Zen

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami