DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 3900 VLAN mapping to WAN Port
- amerhaider2
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
17 Aug 2022 10:43 #101593
by amerhaider2
Draytek 3900 VLAN mapping to WAN Port was created by amerhaider2
Hi
We are trying to set up a VLAN which uses DHCP and offers a direct path out to the Internet for our Wifi users. We have managed to get the VLAN working and it is issuing an IP address, however, we cannot work out how to map this to the WAN port. Does anyone have any advice on how to configure this on a Draytek 3900? We have tried setting up different routes but we are unable to get this to work.
Thanks in advance.
We are trying to set up a VLAN which uses DHCP and offers a direct path out to the Internet for our Wifi users. We have managed to get the VLAN working and it is issuing an IP address, however, we cannot work out how to map this to the WAN port. Does anyone have any advice on how to configure this on a Draytek 3900? We have tried setting up different routes but we are unable to get this to work.
Thanks in advance.
Please Log in or Create an account to join the conversation.
- desquinn
- Offline
- Junior Member
Less
More
- Posts: 73
- Thank you received: 0
17 Aug 2022 11:26 #101594
by desquinn
Des Quinn
Replied by desquinn on topic Re: Draytek 3900 VLAN mapping to WAN Port
on the 28XX's I would create policy route based on source IP address of the WIFI devices and then route them out through the desired lan.
I have done port based VLAN with their own discrete range, as well as having wifi devices in the same DHCP pool but they are assigned a range of IPs based on dhcp vendor id.
I have done port based VLAN with their own discrete range, as well as having wifi devices in the same DHCP pool but they are assigned a range of IPs based on dhcp vendor id.
Des Quinn
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek