DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 3910 and FW 4.3.1.1/v22 auto restart , stability problem

More
29 Aug 2022 10:38 #101673 by jhtwu

rolandrat wrote:
Been on it since this morning, nothing to report so far. Memory use has stayed stable and I do have a 24/7 SSL vpn connection going.

Edit: Ive gone back to 4.3.1 as stability problems with the 2.5Gbe connections, my laptop wouldnt connect kept starting and dropping where as before it was fine, memory had also gone from 68% to 74% in less than a day, which may be fine, but I couldnt take the risk.



2.5Gbe not stable after 1 day ? Maybe you can set link rate to fixed 2.5G ( Port Setup page)
Note that P3/P4 can only be the same link rate
Also there are some messages in debug file which can check the link status (Diagnostics >> Debug Logs)

For total memory usage, 74% should be OK if you saw it in online status (total 2G RAM)
For DrayOS memory usage, you can check by telnet command "sys q"
Also we can see "top snapshot" in debug log file.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami