DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Second router not in HA Group

More
09 Jun 2022 20:31 #101257 by ruzbe
Second router not in HA Group was created by ruzbe
On my Vigor2865 within Diagnostics >> High Availability Status I only see one row which is R1, I don’t see my second Vigor2865 which is R2.

R1:
LAN5
Management IP: 192.168.3.2
Gateway: 192.168.3.1
Virtual IP: 192.168.3.1

R2:
LAN5
Management IP: 192.168.3.3
Gateway: 192.168.3.1
Virtual IP: 192.168.3.1

Both have VLAN 5 enabled with P5 ticked; subnet set to LAN 5; VID set to 5.
WAN into a switch. Two cables from the switch into R1 WAN2 and R2 WAN2.
Ethernet cable going from R1 P5 to R2 P5.


High Availability set to Hot-Stanby on both routers.
Both R1 and R2 are in group ID 1.
R1 has priority 30 and R2 has 20.
Management Interface set to LAN5.
Authentication Key set teh same.

Please Log in or Create an account to join the conversation.

More
09 Jun 2022 21:10 #101261 by ruzbe
Replied by ruzbe on topic Re: Second router not in HA Group
Nevermind this was fixed by setting R1 and R2 gateways to match the management IP address.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami