DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2860n Drayddns issue.

  • siroccoboy
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 May 2022 14:37 #101159 by siroccoboy
Vigor 2860n Drayddns issue. was created by siroccoboy
I have two identical modems on my network each has its own ISP (BT)
They both run firmware 3.9.0
They both have Drayddns services activated.
They both show up in my MyVigor device list.
However one works well and under the service status shows a green flag (upgrade complete)

Upgrade complete
BPjM
Cyren
DT-DDNS 140 Days
DT-APPE

The other has a red flag (upgrade not complete

Upgrade not complete
BPjM
Cyren
DT-DDNS 139 Days

The upgrade not complete modem will not auto update when the Wan IP changes, but works if I force sync it.
My question is, do I need to unbind the device and start from scratch or is there some other way of completing the "upgrade"
There is no info on the Draytek sites to explain what is actually being upgraded!
Any help appreciated.

Please Log in or Create an account to join the conversation.

More
04 Jun 2022 17:19 #101232 by gembrain
Replied by gembrain on topic Re: Vigor 2860n Drayddns issue.
Shame that 2 weeks later nobody has a reply! Did you solve it yourself?

Regrettably I'm in a similar situation with a 2762.

MyVigor shows red flag and no DDNS update - even if I force it..

Please Log in or Create an account to join the conversation.

More
06 Jun 2022 12:51 #101236 by e.ringrose
Replied by e.ringrose on topic Re: Vigor 2860n Drayddns issue.
Has the 2860 been restarted?

I had an issue similar to this with DrayDDNS which disappeared after a restart.

And the obvious one is also to update to 3.9.1.

I think the upgrade being referred to is something internal but required a minimum firmware version. They sent an email regarding it, will have a search for it later.

Please Log in or Create an account to join the conversation.

More
06 Jun 2022 22:56 #101238 by e.ringrose
Replied by e.ringrose on topic Re: Vigor 2860n Drayddns issue.
To add to my earlier post.

The DrayTek emails were sent mid to late Match 2021 - Content below:

At DrayTek, your network security is of upmost importance to us, so we continually work at providing improvements. We do this by releasing updated firmware with security enhancements for all Vigor products, including updates to the MyVigor server.
We are in the process upgrading the system architecture for MyVigor, your devices will need to be upgraded to be compatible with the new system. We therefore require your help to complete the upgrade process by following the steps below. These steps need to be completed within 60 days or the WCF and DrayDDNS services may not work as expected after 2021-05-22.

1. Activate your account

Please click here or access the following URL to authorize the upgrading of your account to the new MyVigor server.
<Link removed>

This link is one-time available for the following 60 days, will be valid until 2021-05-22.

2. Upgrade your Vigor products to the latest firmware

Once your account is updated, your device(s) need to be upgraded for compatibility with the new MyVigor server, please upgrade your device(s) within 2 days.

Here are the device(s) registered to your account which need to be upgraded:

# Device Name Model Latest Firmware Version
1 2860VNPlus Vigor2860 3.9.0

Please upgrade your device(s) to the listed firmware version or above.

After finish these two steps, you have completed the upgrading process.

If you have any questions, or do not finish the upgrading process before 2021-05-22, please submit the support ticket through this page , or submit the issue to support@draytek.com directly.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami