DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2862ac Firmware 3.9.7 upgrade fail

More
15 Feb 2022 12:11 #100627 by inspectorman
Replied by inspectorman on topic Re: Vigor 2862ac Firmware 3.9.7 upgrade fail
3.9.7 happily running here with no installation issues.

Please Log in or Create an account to join the conversation.

  • koenraadr
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Feb 2022 17:38 #100629 by koenraadr
Replied by koenraadr on topic Re: Vigor 2862ac Firmware 3.9.7 upgrade fail
Thank you all. Clearly something iffy with my setup. I rolled back to 3.9.6_BT as I still had a copy and know that works, and then moved straight to 3.9.7_BT and all seems to be working fine...

Please Log in or Create an account to join the conversation.

More
15 Feb 2022 18:25 #100630 by snooks
I have tried several times to upgrade and it fails every time. I had upgraded to 3.9.7_STD from the Draytek.com site by mistake. After speaking to Draytek Support today just before they closed they recommended upgrading to 3.9.7_BT from draytek.co.uk. I have not been able to do this and I keep getting the alarming message that my router will die after the next reboot which is disconcerting? Does anybody have any advice please?

Please Log in or Create an account to join the conversation.

  • koenraadr
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Feb 2022 22:23 #100631 by koenraadr
Replied by koenraadr on topic Re: Vigor 2862ac Firmware 3.9.7 upgrade fail
As above, downgrade... then upgrade. worked for me...

Please Log in or Create an account to join the conversation.

More
16 Feb 2022 10:38 #100632 by snooks
Unfortunately I do not have the 3.9.6 previous version of the firmware :cry:

Please Log in or Create an account to join the conversation.

More
16 Feb 2022 11:16 #100634 by snooks
I went to the downloads on draytek.co.uk to find the old 396 and did the upgrade which worked and then went back to do the 397 upgrade and it failed again.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami