Hi, new user here.
I've had the router running for a while and it has not shown any issues, but I noticed that the uptime on the dashboard was a lot less than expected, so I checked the debug and it showed a firmware error, there was no timestamp so I am not sure if it correlates with the uptime.
Should I be concerned about this?
I noticed my version is 4.3.1_BT and the reported error has current version 4.3.1_RC7, so could this be an old error? If so is there anything I can do to see what caused the restart if not an error?
I've only just enabled the syslog on the console, so I can only see back a short time.
Router Model: Vigor2865ax Version: 4.3.1_BT English
Profile version: 4.0.0 Status: 1 (0x9de81d8f)
Router IP: 192.168.1.1 Netmask: 255.255.255.0
Firmware Build Date/Time: May 4 2021 14:17:01
Router Name: DrayTek
Revision: 7544_1793_260b4cb6a master_V2865ax_V431
Current VDSL2 Firmware Version: 08-0D-01-0B-01-07
ADSL Firmware Version: 08-0D-00-0E-01-01 Annex A
VDSL2 Firmware Version: 08-0D-01-0B-01-07
Router serial no: [redacted]
firmware exception debug info on cpu0
EPC=6057defc, Cause=0080000c, Status=1100fc02, BadAddr=00010000, RetAddr=608ed67c
exception id=3(TLB Store)
exception occured in TASK Level
task_id=161, SP=0x63292408(3988 bytes free, 2464 used bytes)
system tick =30927802
CURRENT_VERSION : 4.3.1_RC7
get from address : 60017000
Dump CPU0 registers:
$ 0: 00000000 fffffffe 000000a8 00000001
$ 4: 00000000 648d1040 0000054e 000001c0
$ 8: 00000000 656c9044 00000001 00000000
$12: 30000000 000a0000 00000000 21c80000
$16: 64759d20 00000000 6475a7b3 00000000
$20: 00000004 6bcb69e0 6bcb72c8 000000ff
$24: 00000000 6085ded8 00000000 00000000
$28: 6314cd00 63292408 63c40000 608ed67c
List a possible caller functions:
func( 0)=60fc0230
func( 1)=608e3ae4
func( 2)=60fc0230
func( 3)=608e8df0
func( 4)=61411f60
func( 5)=603e8a64
func( 6)=613aea50
func( 7)=60f9c9dc
func( 8)=6056b6e8
func( 9)=6091ba34
func(10)=60704aa0
List backtrace functions:
func( 0)=6057defc
func( 1)=6bcb704c
>
