DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130 PPPoE pass-through option missing

  • milesmet
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Feb 2021 09:48 #98530 by milesmet
Hi,
I have a Meraki MX64 device utilising a UK BT ADSL PPPoA line over a DrayTek 130 transparent bridge
The MX only does PPPoE annd with this line being a PPPoE, wanted to utilise the 103's feature of PPPoE Pass-through as shown here:

https://www.draytek.com/support/knowledge-base/5367

But the 130 I have running sw 3.8 doesnt have this option in the management gui, does it only appear once PPP established or ADSL up or is automatic in v308, as I notice that link shows v3.7?

thx

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 10:34 #98532 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 PPPoE pass-through option missing
You won't find that option as it doesn't exist in the UK Vigor 130 which is a modem .

The support page you quote is for the European/Continental Vigor 130 router and has nothing to do with the modem sold in the UK.

Models and support for UK are listed here >> https://www.draytek.co.uk

Out of the box the UK V130 is already in pass through mode.

Please Log in or Create an account to join the conversation.

  • milesmet
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Feb 2021 11:06 #98533 by milesmet
Thank you Adrian, that makes more sense now,
Will the pass-through mode work for my scenario of a PPPoE connection over ultimately the PPPoA ADSL I have?

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 12:11 #98534 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 PPPoE pass-through option missing
It should do.

I have used Vigor 130's on both ADSL and VDSL2 and simply plugged in and used them without any need for configuration.

The PPOE and ISP settings are made in router.

There is a write up for changing to Bridge Mode on the UK site, it is posted here many times should you need it.

Edit : here is the article for setting bridge mode : https://www.draytek.co.uk/support/guides/kb-vigor-130-bridge

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami