DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2865ac firmware

  • dodghz
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Feb 2021 18:36 #98514 by dodghz
Vigor 2865ac firmware was created by dodghz
Hi there,
I've just bought and setup a new Vigor 2865ac router at a UK site which came with 4.2.0.1_MDM2 firmware.

https://www.draytek.co.uk/support/downloads/vigor-2865 shows no firmware updates
https://www.draytek.com/support/latest-firmwares/ does

Q1 - Does anyone know if I should always just check the .com site for updates?

Also, reading the 'Different Annex Type and Modem Codes?' section of https://www.draytek.com/support/knowledge-base/4301 it mentions "For most areas, usually, the STD (Standard) version would work". However, reading the 'File and modem code section of' https://www.draytek.com.tw/ftp/Vigor2865/Firmware/v4.2.2/DrayTek_Vigor2865_V4.2.2_03release-note.pdf it mentions that "Vigor2865_v4.2.2_MDM2.zip" is recommended for the UK.

Q2 - Does anyone know if there's a disadvantage in applying STD versions versus MDM2 versions of firmware updates?


Many thanks in advance for any help.

Please Log in or Create an account to join the conversation.

More
18 Feb 2021 19:27 #98524 by edinburgh
Replied by edinburgh on topic Re: Vigor 2865ac firmware
If you're in the UK, then usually no, as it says that clearly on their website that firmware version for the UK is for BT lines.

You can experiment with other firmware versions and modem codes, but they can result in instability.

Please Log in or Create an account to join the conversation.

  • dodghz
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Feb 2021 20:34 #98526 by dodghz
Replied by dodghz on topic Re: Vigor 2865ac firmware
Thanks edinburgh,
I'll stick with the STD releases from now on and just check the UK site now & again :D

Please Log in or Create an account to join the conversation.

More
18 Feb 2021 20:49 #98527 by edinburgh
Replied by edinburgh on topic Re: Vigor 2865ac firmware
But BT firmware is not the same as STD firmware

Please Log in or Create an account to join the conversation.

More
15 Mar 2021 08:20 #98784 by admin
Replied by admin on topic Re: Vigor 2865ac firmware
BT firmware is the one which has specific requirements mandated by Openreach.



Forum Administrator

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami