DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 903 can't create device object

  • philip456
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Feb 2021 12:57 #98422 by philip456
Vigor 903 can't create device object was created by philip456
Whenever I try to create a Device Object, it doesn't save.

> Wireless LAN (5GHz)
> Station List
> Tick the entry for a client
> +Device Object
> This opens a popup called Add Device to Device Object
> Enter a name
> Click OK.

It appears to accept the entry but actually the Device Object name stays the same.

Am I doing this wrong? It works on my two Vigor 802s.

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 14:16 #98423 by piste basher
Replied by piste basher on topic Re: Vigor 903 can't create device object
Just tried it on one of my AP903s and as you say, it doesn't seem to do anything.

I've never tried this before - no help to you I'm afraid but what exactly is the use of this setting (assuming that it worked) ?

Please Log in or Create an account to join the conversation.

  • philip456
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Feb 2021 18:46 #98427 by philip456
Replied by philip456 on topic Re: Vigor 903 can't create device object
When I look at the station list, I need to refer to a spreadsheet of mac addresses, to work out what the devices are.

If I can give them names, it would make life a lot easier.

Please Log in or Create an account to join the conversation.

More
12 Feb 2021 01:00 #98432 by hornbyp
Replied by hornbyp on topic Re: Vigor 903 can't create device object

philip456 wrote:
Am I doing this wrong? It works on my two Vigor 802s.



It's undoubtedly a bug :roll:

However, the "Objects Setting >> Device Object" has a "Create from Wireless Station Table" (/adm/devobjstat.asp) ... which does something similar and I think must be what I used to do this.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami