DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120 logs

  • custard1
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Feb 2021 19:35 #98397 by custard1
Vigor 120 logs was created by custard1
Hi all,

I'm trying to get logs from my Vigor 120 as requested by my ISP. However, it appears the firmware doesn't allow me to access these in the same way as the user guide suggests (from what I read to do with the UK firmware being preconfigured to certain settings). Anything at all I can do to get around this? They've specifically asked for the modem logs rather than the router logs.

Thanks in advance for any help.

Please Log in or Create an account to join the conversation.

More
08 Feb 2021 10:10 #98399 by adrianh54
Replied by adrianh54 on topic Re: Vigor 120 logs
Quote from a 10+year old post from the "net".

1. First, connect the 120 to a PC and give it (the 120) a fixed IP address on the same subnet as the router.

2. Now move the 120 onto a LAN port of the router.

3. Connect a patch cable between a second LAN port on the router and the router's WAN port.

You can now address the 120 from any machine on the LAN, using the IP address you gave it in 1.

This won't work with dual WAN setups or MPoA connections though



My question would be why on earth you are still using a dinosaur modem for your connection. it is well past its sell by date , are you stuck on ADSL2+?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami