DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130, Nest Wifi with BT Infinity

  • dleifne78
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Feb 2021 11:47 #98385 by dleifne78
Vigor 130, Nest Wifi with BT Infinity was created by dleifne78
Hi, I have tried searching the forum before posting this but cannot seem to find anything that describes the issue I am having.

I have a Draytek Vigor 130 which is in Bridge mode, I have set the Draytek to 101 for the Vlan but every time I try to configure the Nest it says "Configuring PPPoE failed. Please note that VLAN ID tagging is not supported."

I am at my wits end with this. Any help would be appreciated.

Please Log in or Create an account to join the conversation.

More
07 Feb 2021 12:59 #98389 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130, Nest Wifi with BT Infinity
https://www.draytek.co.uk/support/guides/kb-vigor-130-bridge

The only actions required are shown on the above linked page.

Nothing else needs changing. Where have you entered "101" as a Vlan tag?

Please Log in or Create an account to join the conversation.

  • dleifne78
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Feb 2021 13:28 #98390 by dleifne78
Replied by dleifne78 on topic Re: Vigor 130, Nest Wifi with BT Infinity
Hi Adrian - I am not sure how to add screenshots of my settings but in internet access, general setup there is an option for VDSL2 to put in a Tag Value. In the service column I entered 101 as I had read this was the VLAN Tag required by BT ?

Please Log in or Create an account to join the conversation.

More
07 Feb 2021 13:29 #98391 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130, Nest Wifi with BT Infinity
You should not enter anything in the "Service" column. If you follow the DrayTek instructions it should work.

Please Log in or Create an account to join the conversation.

  • dleifne78
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Feb 2021 17:28 #98395 by dleifne78
Replied by dleifne78 on topic Re: Vigor 130, Nest Wifi with BT Infinity
Thanks Adrian, I did a factory reset on the Vigor 130 and then followed those instructions and its working now :D

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami