DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

CLI access to Draytek

  • bluemoon
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Jan 2021 12:41 #98297 by bluemoon
CLI access to Draytek was created by bluemoon
I am wondering if there is a way to enable CLI (command line) access to a Draytek ? We have a 2762 and I am trying to run some IPv6 debugging on the box....in particular interested to see some DHCP-PD interactions on the provider side and also RA's on the LAN side ?

Please Log in or Create an account to join the conversation.

More
27 Jan 2021 15:04 #98299 by adrianh54
Replied by adrianh54 on topic Re: CLI access to Draytek

bluemoon wrote:
I am wondering if there is a way to enable CLI (command line) access to a Draytek ? We have a 2762 and I am trying to run some IPv6 debugging on the box....in particular interested to see some DHCP-PD interactions on the provider side and also RA's on the LAN side ?



Google is your friend.:

https://www.draytek.co.uk/support/guides/kb-draytek-cli-win

Accessing the router's Command Line Interface (CLI) from Windows
DrayTek Vigor routers and access points are primarily configured and monitored through the Web User Interface (WUI) but can also be monitored or configured through the router's Command Line Interface (CLI). The router will accept commands that follow valid syntax (type "?" in the CLI for examples of these) and allows the router to output information that may be required for diagnostics.

Please Log in or Create an account to join the conversation.

More
27 Jan 2021 16:27 #98300 by hornbyp
Replied by hornbyp on topic Re: CLI access to Draytek
Not forgetting the "Web Console", accessible via the "Web GUI" ...





(Once logged into the router, you can open the "Web Console" manually, in its own, full-sized 'tab',
using http://MyVigorAddress:myport/doc/console.htm)

[Substitute appropriate values for MyVigorAddress and myport]

Please Log in or Create an account to join the conversation.

  • bluemoon
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Feb 2021 10:39 #98359 by bluemoon
Replied by bluemoon on topic Re: CLI access to Draytek
Thanks !

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami