DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

SNMP 2865 bad after Firmware 4.2.2_STD

  • bernd-uwe
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Jan 2021 11:13 #98166 by bernd-uwe
SNMP 2865 bad after Firmware 4.2.2_STD was created by bernd-uwe
Hi,

I have upgraded my SNMP 2865 to Firmware 4.2.2_STD and now I don't have good SNMP data. There is some data received but the amounts are minimal. For example, on WAN Interface I have regular transferdata about 300 Mbyte/sec now it shows some kbytes/sec.

Is this a known bug? Why is the SNMP data bad now?

Please Log in or Create an account to join the conversation.

More
03 Mar 2021 14:44 #98693 by saloiche
Replied by saloiche on topic Re: SNMP 2865 bad after Firmware 4.2.2_STD
Hi, I am having also problems with SNMP with the same model and FW version, but as it is a recently purchased router I did not tried before FW upgrade.

I have tried with the OID codes provided in the Draytek web page:
https://www.draytek.com/support/knowledge-base/5517#system

but they do not work, so I have tried with other OID found at Internet and using this command line:
snmpget -v 2c -c public -O qv 192.168.1.1 .1.3.6.1.2.1.1.1.0

And I get this response:
"DrayTek Corporation, Router Model: Vigor2865 Series, Version: 4.2.2_STD, Build Date/Time:Dec 2 2020 14:45:15, CPU Usage: 3%, Memory Usage:84%"

Based on the previous evidence I am sure that the configuration of the SNMP service in the router and the commands I send are correct.

Could you please tell me what are the OID codes you were or are using.

Please Log in or Create an account to join the conversation.

More
10 Apr 2021 08:10 #99041 by aimdev
Replied by aimdev on topic Re: SNMP 2865 bad after Firmware 4.2.2_STD
Also experienced a loss of snmp data on the LAN port. (ADSL, WAN still functioning correctly)
Added all the ports LAN_PORT_6 etc), no results.
Everything was fine until the latest update to the 2860 firmware

Please Log in or Create an account to join the conversation.

  • bernd-uwe
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Apr 2021 08:47 #99042 by bernd-uwe
Replied by bernd-uwe on topic Re: SNMP 2865 bad after Firmware 4.2.2_STD
Looks that the "upgrade" of hardware acceleration has bring down the functionality with SMTP in the 4.2.2_STD firmware. SMTP don't works here anymore.
Nice that the manufacture don't recognize this :-(

Please Log in or Create an account to join the conversation.

More
15 Apr 2021 17:00 #99077 by dush
Same for me on the 2927. The updated hardware functionality is welcome but I do miss being able to see the proper SNMP info

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami