DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Mains adaptor exit lead extender - what spec?

  • jann
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Dec 2020 13:44 #98005 by jann
Mains adaptor exit lead extender - what spec? was created by jann
Have a 2860 which I need to place a distance from the mains supply, so looking for a cable to put on existing end of mains adaptor lead which then goes to router.
Looking around net, I think the right thing to buy is a 'barrel power cord'. Anyone purchased one of these and is it 2.1mm or 2.5mm? Tricky to measure.
Thanks

Please Log in or Create an account to join the conversation.

More
23 Dec 2020 17:03 #98007 by adrianh54
Replied by adrianh54 on topic Re: Mains adaptor exit lead extender - what spec?

jann wrote:
Have a 2860 which I need to place a distance from the mains supply, so looking for a cable to put on existing end of mains adaptor lead which then goes to router.
Looking around net, I think the right thing to buy is a 'barrel power cord'. Anyone purchased one of these and is it 2.1mm or 2.5mm? Tricky to measure.
Thanks




It would be safer and simpler to use a mains extension lead.

Please Log in or Create an account to join the conversation.

More
23 Dec 2020 19:02 #98008 by hornbyp
Replied by hornbyp on topic Re: Mains adaptor exit lead extender - what spec?

jann wrote:
is it 2.1mm or 2.5mm? Tricky to measure.


According to my Vernier calipers, the outer diameter is 5.5mm and the connector part is 9mm long.

Maybe try and find a technical PDF at RS or Farnell, for one that matches?

Please Log in or Create an account to join the conversation.

More
23 Dec 2020 20:10 #98010 by hornbyp
Replied by hornbyp on topic Re: Mains adaptor exit lead extender - what spec?
Perhaps more usefully, I found that a 2.5mm drill bit is a nice snug fit, into the plug's centre hole.

Please Log in or Create an account to join the conversation.

  • jann
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Dec 2020 21:46 #98011 by jann
Replied by jann on topic Re: Mains adaptor exit lead extender - what spec?
hornbyp - Brilliant! Thanks for that, I (virtually) owe you!

Please Log in or Create an account to join the conversation.

  • jann
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Dec 2020 15:52 #98020 by jann
Replied by jann on topic Re: Mains adaptor exit lead extender - what spec?
Received today via Amazon (Farnell wanted to add £14 handling charge...) - and seems to work fine.
For anyone else needing similar, I got: CDL Micro 1.5 m DC Jack 5.5 x 2.5 mm Power Male to Female M-F Extension Cable for CCTV Camera, Black - £3.49
Thanks for assistance!

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami