Purchased a 2927AC to replace a 2862 as the Wifi was falling over due to demand .

Firmware updated to 4.2.0.2 and attempted to copy the cfg over with no success . I have connected the 2927AC to my cable router and all works fine .
I have moved the management ports and changed the SSL port to 444 .

I have set the NAT to port forward port 80 to my long established and working web server and can resolve to the server internally .

When I dial a number of other Draytek routers using smart VPN connections the SVPN stalls at authenticating then disconnects .

I have looked round the net to no avail . Any help greatly appreciated .

FIX


Web Forwarding PORT 80 not working after factory reset if using a WAN IP .

1, Go to WAN IP alias and add the ISP assigned IP .
2 , Go to NAT > Open ports and create port 80 and port 443 forwarding to the internal webserver
Selecting the Aux as the ISP IP from step 1 .

*****Fixed*****

Factory reboot and reconfigured.