DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Standby issue witrh Vigor 2927K

  • kieran-iw
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Nov 2020 19:12 #97711 by kieran-iw
Standby issue witrh Vigor 2927K was created by kieran-iw
Evening,

For a some odd reason all LEDs gets disabled except Port 1 when in Standby (System Maintenance >> Panel Control >> LED), please can one of you kind fellows help me rectify this, thanks.

Port 1 is used for the buildings wireless mesh (3x Plume Superpods) and P2 is used for this computer.

Latest firmware flashed today (v4.2.0.2).

Edit: Just initiated a factory reset and the above issue is still present!

Regards, Kieran.

Please Log in or Create an account to join the conversation.

  • kieran-iw
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 Nov 2020 10:20 #97713 by kieran-iw
Replied by kieran-iw on topic Re: Standby issue witrh Vigor 2927K
Morning,

It'll be awesome if someone here help me rectify this annoyance please.

Kind regards, Kieran.

Please Log in or Create an account to join the conversation.

More
15 Nov 2020 18:02 #97720 by piste basher
Replied by piste basher on topic Re: Standby issue witrh Vigor 2927K
I assume by "Standby" you mean Sleep mode on the LED control? I don't have a 2927 but I just tried sending the LEDs to sleep on my 2926. Intriguingly, all the LEDs extinguished except the right hand one on port 5. No idea why that should be - I suggest you raise a ticket with Draytek support (this is a user forum. and I suspect not many users have 2927s as yet).

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami