DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Opening Ports on a 2960

  • soggydan
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Sep 2020 21:41 #97309 by soggydan
Opening Ports on a 2960 was created by soggydan
Hi all

I have been using a 2962 for some years with the "Open Ports" to a internal IP address and specifiny the port. this has worked great for me as i need a few IPs to have a particular port open so cant use port forwarding. I have now upgraded my Virgin internet to 350Mb and the router seems to be a bottle neck now so i purchased a 2960

How/where do i config "open ports" the menu is no longer there in this edition of the firmware, it looks completly different. Its 1.5.1.2

any help would be great

thanks

Please Log in or Create an account to join the conversation.

More
30 Sep 2020 22:11 #97310 by service_bb
Replied by service_bb on topic Re: Opening Ports on a 2960
On DrayOS Open Ports / Port Redirection are 2 different things.

On the Linux based firmwares (which the 2960 runs) it's all done under NAT -> Port Redirection -> Add

Please Log in or Create an account to join the conversation.

  • soggydan
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Sep 2020 22:50 #97311 by soggydan
Replied by soggydan on topic Re: Opening Ports on a 2960
So i would just ADD a rule to forward a port to the same port on the internal IP?

what if i need the same port to 2 different IPs?

Please Log in or Create an account to join the conversation.

More
04 Jan 2021 16:39 #98091 by pharcyder
Replied by pharcyder on topic Re: Opening Ports on a 2960
I don't think you can do that unless you have multiple public IPs.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami