DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2862n rebooting at 00:00 every Sunday

  • af7567
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Sep 2020 00:50 #97200 by af7567
Hi
I have a 2862n connected by WAN2 to a FTTP modem and the PPPoE login is handled by the DrayTek router. Everything is working fine but for some reason it keeps crashing/rebooting at 00:00 every Sunday. When it restarts this way the WAN2 connection drops to 10Mbps instead of 1Gbps and I need to restart the router again to get it back to 1Gbps. The only schedules that I have ever set on the router are to disable WiFi at the weekend which does "force down" from 00:00 to 23:59 on saturday and sunday. I have cleared those schedules now to check if the same problem happens next weekend.
I set up email reporting and got the following emails after tonights crash:

Code:
2020/09/20 00:02:06 -- ---------firmware exception debug info----------------------------- EPC=80991630, Cause=00800028, Status=1100fc02, BadAddr=83d307c0, RetAddr=80991630 exception id=10(RI: Reserved Instruction) exception occured in IdleTask Timeout task_id=127, SP=0x83680af8(3400 bytes free, 4816 used bytes) system tick =60466297 CURRENT_VERSION : 3.9.4_RC5 get from address : 80004000 Dump CPU registers: ----------------------------------------- $ 0: 00000000 fffffffe 1100fc01 1100fc00 $ 4: 00000000 836804d8 00000003 00000001 $ 8: 836804d7 00000001 00000003 838d01a6 $12: 00000000 00000010 838d0000 fe042fb0 $16: 84830300 838c4fe8 81470000 848432c0 $20: 81175d54 00000000 8146f160 83d307c0 $24: 00000000 00000000 000000a5 83680afc $28: 8180e240 83680af8 00000000 80991630

and
Code:
2020/09/20 00:02:39 -- List a possible caller functions: ---------------------------------- func( 0)=81175dbc func( 1)=81175d2c func( 2)=81170000 func( 3)=811763c8 func( 4)=81175d54 func( 5)=811761e8 func( 6)=80f92fe0 func( 7)=81087988 func( 8)=809918e0 func( 9)=81170000 func(10)=8117619c func(11)=81175d54 func(12)=8098f9c8 func(13)=8098fea8 func(14)=8098fd78 func(15)=8098ff7c func(16)=80991824 func(17)=8098fd78 func(18)=8098fd78 func(19)=8099194c List backtrace functions: ---------------------------------- func( 0)=80991630 func( 1)=809918e0 func( 2)=8098f9c8 func( 3)=8098fea8 func( 4)=8098ff7c func( 5)=8099194c func( 6)=80991a00 func( 7)=8098d810 func( 8)=809b0260


I don't know if that explains what causes the crash.

Please Log in or Create an account to join the conversation.

More
20 Sep 2020 02:05 #97201 by hornbyp

af7567 wrote:

Code:
CURRENT_VERSION : 3.9.4_RC5



Is there any particular reason for running this Release Candidate?
Maybe the public release will behave better? https://www.draytek.co.uk/support/downloads/vigor-2862 (Currently 3.9.4.1)


I don't know if that explains what causes the crash.



Only to someone with a copy of the Vigor 2862 source code - which unfortunately, is no one here :(

Please Log in or Create an account to join the conversation.

More
20 Sep 2020 13:19 #97203 by adrianh54
Replied by adrianh54 on topic Re: Vigor 2862n rebooting at 00:00 every Sunday
So you have nothing set at >


GUI > System Maintenance > Reboot System > Auto Reboot Time Schedule



You could try setting up a reboot schedule and then deleting it again.

Please Log in or Create an account to join the conversation.

  • af7567
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Sep 2020 13:30 #97204 by af7567

hornbyp wrote:

af7567 wrote:

Code:
CURRENT_VERSION : 3.9.4_RC5



Is there any particular reason for running this Release Candidate?
Maybe the public release will behave better? https://www.draytek.co.uk/support/downloads/vigor-2862 (Currently 3.9.4.1)


I wondered why it said RC5 too, but that is actually the public version 3.9.4 which was the latest version when I downloaded it a few weeks ago. It's not the BT version though because I had been told by the ISP to not use a BT firmware version. But since 3.9.4.1 is out now I should give that a try when someone is back in the office :)

Please Log in or Create an account to join the conversation.

  • af7567
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Sep 2020 13:36 #97205 by af7567

AdrianH54 wrote:
So you have nothing set at >


GUI > System Maintenance > Reboot System > Auto Reboot Time Schedule



You could try setting up a reboot schedule and then deleting it again.


Good idea, I will give that a go too.
Still very strange that this unexpected midnight reboot would cause the ethernet connection to the modem to only go 10Mbps when it's fine at 1Gbps the rest of the time. Is there really an option somewhere to "reboot and set WAN2 to 10Mbps" :)

Please Log in or Create an account to join the conversation.

More
20 Sep 2020 18:16 #97207 by hornbyp

af7567 wrote:
I wondered why it said RC5 too, but that is actually the public version 3.9.4


Draytek at their best :roll:

It's not the BT version though because I had been told by the ISP to not use a BT firmware version.


I was a long time user of Virgin Media, so when I moved house and had to switch to VDSL, I had no idea which firmware version to use (on my 2860). I just tried 'em all - and found significant differences in speed...

(There again, you'd like to think your ISP would know best - unless of course, it's Talktalk :roll: :lol: )

To add - at one point - in the Virgin Media days - Draytek had me switch to one of the 'vectoring versions' (for want of a better phrase). I couldn't understand what difference this would make (given the 2860 was using WAN2 to connect to a VM Super Hub. But it did :!: )

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami