DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2925 and Data Flow Monitor

More
27 Jun 2020 15:58 #96529 by mbames
2925 and Data Flow Monitor was created by mbames
Draytek 2925, running latest firmware (3.8.9.8)

I needed a 9GB file from a mate, so I quickly opened a port redirection (wan:2222 to local:22) under NAT | Port Redirection

Mate is able to sftp a file over no issues there. However I notice that the main Data Flow Monitor page for isn't showing/logging traffic on the redirected port number, but other traffic for this LAN IP on non-redirected ports is reported fine. Looking at just the single machine (by clicking on its IP address) show a graph, but again it is missing the incoming sftp transfer.
Code:
RX Rate(Kbps): 12


Oddly, the RX total at the bottom appears to be correct
Code:
Current / Peak / Speed: 19487 / 58976 / Auto


However, if I look at the traffic graph (Diagnostics | Traffic Graph), I can see the RX is at this level is correctly reporting the incoming data. Likewise Online Status | Physical Connection is happily reporting:
Code:
RX Rate(Mbps): 19.43

Please Log in or Create an account to join the conversation.

More
27 Jun 2020 16:20 #96530 by piste basher
Replied by piste basher on topic Re: 2925 and Data Flow Monitor
I had a 2925 and now have a 2926. The data flow monitor page sometimes shows data flowing and other times it is completely blank (by which I mean there is nothing in any of the columns), for no reason that I have been able to discern.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami