DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

BT ipv6 on a draytek 3910

More
30 May 2020 17:22 #96264 by the pit
BT ipv6 on a draytek 3910 was created by the pit
Evening folks has anyone got this working on a draytek 3910. I had it working briefly on the 2960 but turned it off as I kept getting ipv6 conflicts . However the settings on the 3910 are totally different and don't match any of the earlier models using a version of the same os.

Oops forgot to mention BT is via a draytek 130 and that's picking up the ipv6 address fine.

The other wan is virgin and they don't supply ipv6.

Please Log in or Create an account to join the conversation.

More
01 Jun 2020 11:00 #96275 by richard1234
Replied by richard1234 on topic Re: BT ipv6 on a draytek 3910
What have you configured in the IPv6 setup? (page 11-2-2-3 onwards in the 3910 manual)
Have you tried DHCPv6 Client?

I am not familiar with the 130 but if it is a modem how does it get an ipv6 address - surely it just passes ip packets through?

Please Log in or Create an account to join the conversation.

More
01 Jun 2020 17:04 #96277 by the pit
Replied by the pit on topic Re: BT ipv6 on a draytek 3910
Yes tried dhcp6 client and no go. You can plug the draytek 130 directly into a pc and set up ppoe connection. Open the web page and look at the stats.

Please Log in or Create an account to join the conversation.

More
01 Jun 2020 17:27 #96278 by the pit
Replied by the pit on topic Re: BT ipv6 on a draytek 3910
LOL got it working the setting was ppp. I tried that before but it didn't work I'm sure of it.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami