DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Router letting port 80 through...
- andymorton
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank yous received: 0
20 Dec 2019 16:06 #95337
by andymorton
Router letting port 80 through... was created by andymorton
Hi.
Got a basic firewall (ie out of the box). remote management is not enabled, but for some reason, port 80 (and snmp, time a couple of other UDP services) is open.
The UDP services are 'filtered' according to nmap, but the port 80 is open. Issuing a request from curl (or a browser) just hangs - no bytes are transferred back.
The model in question is a vigor 2860.
Any ideas??? Have I missed a setting buried deep in the config?
A.
Got a basic firewall (ie out of the box). remote management is not enabled, but for some reason, port 80 (and snmp, time a couple of other UDP services) is open.
The UDP services are 'filtered' according to nmap, but the port 80 is open. Issuing a request from curl (or a browser) just hangs - no bytes are transferred back.
The model in question is a vigor 2860.
Any ideas??? Have I missed a setting buried deep in the config?
A.
Please Log in or Create an account to join the conversation.
- mbames
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
20 Dec 2019 20:14 #95338
by mbames
Replied by mbames on topic Re: Router letting port 80 through...
Latest firmware?
Do you have web management enabled on the internal side on port 80? If you change it to say 8080, what happens then?
Do you have web management enabled on the internal side on port 80? If you change it to say 8080, what happens then?
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek